Rhino Eco-Coat® is a fast set, plural component aluminized hybrid polyurea spray applied lining for commercial and industrial roofs. This system contains UV stabilizers and leafing aluminum pigment for enhanced UV stability.
Rhino Eco-Coat can be sprayed using both high and low pressure plural component spray equipment.
TYPICAL PHYSICAL PROPERTIES
| Tensile Strength (psi): | ASTM D-412 | 1850-1950 |
| Elongation (%): | ASTM D-412 | 380-420 |
| Hardness (Shore A): | ASTM D-2240 | 85±5 |
| Tear Strength Die C (pli): | ASTM D-624 | 300-400 |
| Taber Abrasion Resistance: H18 Wheel, 1000 grams weight (mg of loss/1000 cycles) |
ASTM D-4060 | 170 |
| Permeability (perms): | ASTM E-96 | 0.022 |
| Weathering/UV Resistance: (2000 hrs) |
ASTM G-53 | No Integrity loss |
PROCESSING PROPERTIES
Gel Time (sec) 8
Tack Free (sec) 40
Cure Time: 1 hour @ 70°F (longer at lower temperature)
Recoat, max: 1 – 2 hours
Theoretical coverage: 1600 sq ft @ 1 mil/gal
Tack Free (sec) 40
Cure Time: 1 hour @ 70°F (longer at lower temperature)
Recoat, max: 1 – 2 hours
Theoretical coverage: 1600 sq ft @ 1 mil/gal
FEATURES AND BENEFITS
- Fast Cure – Can be walked on within minutes of being sprayed
- Water Proof – Prevents penetration of water
- Flexible – For long term impact and crack resistance
- Durable – High tensile strength, chemical and abrasion resistance
- Labor Savings – Required mils can be applied in one coat
- Adhesion – Excellent adhesion to most surfaces
- Thermal Stability – From -30°F to 230°F (-34°C to 110°C)
- Environmentally Friendly – Low VOCs
