HardLine®

HardLine® provides superior high-level chemical resistance and protection against impact, abrasion and corrosion for pipes, containment structures and surfaces requiring maximum protection. It is a two-component, 100% solids (no VOCs, no solvents), exothermic, rapid curing, elastomeric polyurethane lining system. It can be applied with either low or high-pressure equipment.
 
HardLine has a Shore D 55 (ASTM D2240) hardness and a 50-80% (ASTM D412) elongation for the 2:1 ratio formulation and 125-175% (ASTM D412) elongation for the 1:1 ratio formulation which is designed for harder surface protection and has excellent chemical resistance. HardLine 21-55-120 is formulated with a slow gel time allowing for a smooth surface spray or casting of products.
 

HARDLINE FORMULATION PROPERTIES

 

  • High tensile strength and tear strength properties
  • Very good abrasion and impact resistance
  • Good chemical resistance
  • Excellent corrosion resistance
  • Good noise reduction

 

TYPICAL HARDLINE APPLICATIONS

 

  • Casting material for material handling eq. (chutes, hoppers, rollers)
  • General purpose lining applications
  • Truck beds requiring hard as nails protection
  • High impact applications
  • Material handling and flooring applications where products or vehicles side across a surface
  • Primary & Secondary Chemical Containment
  • Water and Wastewater Facilities
  • Sedimentation Basins
  • Pump Stations
  • Pipes – Outside
  • Light vehicular and foot traffic